POSITION TITLE POSITION TYPE PAY SHIFT HOURS DETAILS
Auto Mechanic - GM Certified Service Technician
Full Time
$25-30/hour
varies
Summary of Duties:
We are looking for Auto Mechanics to test and repair vehicles. You will be responsible for troubleshooting issues and fixing them to maximum reliability and functionality. The successful candidate will test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment.

Essential Duties:
-Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc.
-Perform repairs to manufacturer specifications
-Identify problems by using computerized diagnostic equipment and test driving
-Test parts and systems to ensure that they work properly and be able to make adjustments as needed
-Follow checklists to ensure that all critical parts are examined
-Explain automotive problems and repairs to Supervisor
-Road-test vehicles to ensure quality of repair work

Education Level: GM Service Technician experience required, ASE Certification required

Experience:
• A-level qualifications, including Diagnostic, Electrical and Mechanical Repair
• Ability to collaborate effectively
• Ability to learn new technology, repair and service procedures and specifications
• Able to operate electronic diagnostic equipment
• Must have a valid driver's license and a clean driving record

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands and reach with arms. Work activities require gripping and grasping with the hands when performing assembly of equipment by utilizing hand tools, power tools, air tools, nuts, bolts, electronic controls, and other small parts. Work may require arms to be raised for prolonged periods of time. Occasional use of foot/feet to operate foot pedal on equipment to test for proper operation.
The employee is frequently required to stoop, bend, kneel, crouch or crawl. Work requires the ability to climb over/into components several times per shift. The employee will frequently walk and stand on concrete & uneven surfaces for 8-10 hours each shift. The employee must frequently lift up to 25 lbs. and occasionally lift and/ or move up to 50 lbs.
The employee is required to talk and hear. Work requires specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




CNC Machinists (Davisville, WV)
Full Time
up to $26/hour, based on experience
all shifts available
Summary of Duties:
JWF Industries is seeking CNC Machinists to join their growing, highly skilled team in Davisville, WV.
Davisville is an extension of JWF Industries’ 1,000,000 square feet of total metal manufacturing space across four locations in the Johnstown, PA area.

Essential Duties:
Our Machinists must be safety-minded to contribute to the amazing safety record of the facility. Top quality work and attention to detail is essential to meet customer requirements, as well as the ability to work with time-critical projects and frequently changing production needs.

Education Level: Previous machining training or vo-tech education preferred; we will train

Experience:
• CNC Machining experience
• Experience reading drawings and blueprints to determine critical part information
• Experience with part inspection and related hand tools/precision measuring devices

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




CNC Machinists (Johnstown, PA)
Full Time
up to $30/hour based on experience
various shifts available
Summary of Duties:
JWFI is a growing metal manufacturing company, continuing to expand into defense & other markets with long-term work. We’re looking to interview experienced CNC Machinists and Machine Operators at all levels to join the team at our Woodvale machining and welding facility.

Our highly skilled CNC Machinists perform set up and operations, working side by side with the Quality Department to ensure exacting tolerances are held, quality parts are shipped, and on-time delivery dates are met.

Essential Duties:
CNC Machinists will need knowledge/experience reading drawings and blueprints to determine critical part information, and have experience with part inspection and related hand tools/precision measuring devices.

Education Level: All education/experience levels will be considered

Experience:
Candidates will be evaluated throughout the interview process for placement into Machining positions of varying levels including: Machine Operator, Machinist, Set-up Machinist

Physical Demands: While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




EHS Professional
Full Time
based on experience
M-F, 7a-4p, other hours as required
Summary of Duties:
The Environmental Health & Safety (EHS) Professional at JWF Industries is responsible for implementing and overseeing EHS programs at all JWFI locations and facilities. These programs include, but are not limited to: environmental, industrial hygiene, and emergency response & planning. The successful candidate will provides guidance and facilitate a collaborative approach to implementation of EHS programs in order to mitigate risk and prevent incidents of environmental releases and related situations.

Essential Duties:
• Assesses the facility to identify environmental risks while supporting actions associated with health and safety. Interfaces with all departments to develop and implement corrective/improvement measures
• Develops, implements and maintains programs and processes related to environmental compliance with all federal, state, and local environmental standards and requirements. Provides technical support and guidance relative to environmental issues and hazardous materials response to ensure proper training, appropriate incident response, and proper equipment.
• Maintains all documentation essential to efficient operations of the EHS program. Monitors interactions with regulatory authorities, insurance carriers or EHS consultants on issues impacting manufacturing operations. Responsible and accountable for the preparation, submission, and documentation of all applicable regulatory reporting requirements.
• Prepares federal, state and local permit applications and maintains positive working relationships with regulatory agencies. Remains abreast of any proposed environmental regulations to determine impact on JWFI operations; communicates and drives a course of action in response to changes. Serves as liaison with regulatory agencies, and outside vendors pertaining to environmental matters. Responsible for routine reporting, audits, and permit renewals
• Trains and mentors employees and contractors on relevant environmental guidelines while supporting the company’s Health and Safety guidelines. Supports JWFI health and safety programs and initiatives by conducting inspections/observations, incident management, risk assessments and employee training.

Education Level: Bachelors degree in EHS or related field is required

Experience:
Minimum of one (1) year of fulltime EHS experience in a manufacturing environment is required.
Work requires:
-Excellent analytical and problem-solving skills
-Excellent written and verbal communication skills; able to present and train to all levels of the organization
-Excellent organizational skills and attention to detail
-Demonstrated ability to successfully manage shifting deadlines and priorities in a fast-paced environment
-Proficiency in Microsoft Office Suite or similar software

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Industrial Maintenance Technician
Full Time
$18-21+ to start, based on experience
7am-3:15 M-F
Summary of Duties:
The successful candidate will install, repair, troubleshoot & maintain metalworking machinery, and repair electrical equipment (wiring according to code).

Essential Duties:
-Troubleshoots mechanical devices and machinery in operation and listens to their sounds to locate causes of trouble; dismantles to gain access to, repair or remove defective parts.
-Installs and maintains equipment according to manufacturer specifications.
-Starts devices and machinery to test their performance.
-Repairs electrical equipment and wiring according to code and machine requirements. Troubleshoots electrical control panels from electrical schematics.

Education Level: Completion of vocational or trade school in electrical field preferred

Experience:
-Preferred candidate will have a minimum of 3 years of industrial maintenance experience.
-Must have strong working knowledge of PLC and electronics; experience in industrial electrical installation of 600 volts or less. Experience with industrial hydraulic systems preferred. 3-phase industrial electricity experience highly preferred
-Must have the ability to perform all duties in safe manner, in concern for self, co-workers and the equipment.
-Work requires the ability to read and comprehend simple to complex instructions, blue prints, and short memos, as well as the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Must be able to comprehend and understand control circuit electrical diagrams.

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Intern - Supply Chain - Summer 2022
based on year in school
predominantly daylight
Summary of Duties:
The Supply Chain Intern plays a key role by providing on-going support and value throughout the supply chain process. The intern will focus on analytics, optimization and process improvements within the Supply Chain to meet customer service levels and business metrics.

IMPORTANT NOTE: No general applications will be routed for consideration. Only Supply Chain candidates will be considered.

No phone calls, please.

Essential Duties:
•Work with internal and external customers to coordinate activities
• Inventory planning for production
• Support additional projects and activities as necessary
• Ability to manage and maintain the organization of centralized department shared folders

Education Level: Sophomore or higher, majoring in Supply Chain, Operations Management or Logistics

Experience:
• Candidates should have excellent verbal and written communication skills
• Must be proficient in MS Excel, Access or other similar data analysis programs
Strong data analysis skills (Excel) and the ability to synthesize into a cohesive message is required.

Physical Demands:
While performing the duties of the job, the intern is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. The intern is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The intern is frequently required to stoop, kneel, crouch or crawl and talk or hear. The intern will frequently walk. The intern must occasionally lift and/ or move up to 20 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The intern may be exposed to fumes or airborne particles, moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The intern is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.





Intern - Welding - Summer 2022
Part Time
based on year in school
as assigned
Summary of Duties:
IMPORTANT NOTE: Only apply for this internship if Welding is your field of study. No general applications will be routed for consideration.

This welding intern will become part of the Production Team and be required to complete various welding assignments. The intern will learn various welding applications, procedures and become familiar with equipment to support the weld processes.

Essential Duties:
Responsibilities will include:
• Ensure that the work environment is safe, and within established standards
• Reading and understanding blueprints prior to starting a project
• Sourcing the materials to be used in the project
• Welding materials using the correct materials to join the metals together
• Checking finished work to make sure that it falls within the tolerances marked on the blueprints

Education Level: Applicants must be currently enrolled in a welding program

Experience:
Applicants should possess strong knowledge in welding procedures and be able to weld in various positions after completing the assigned welding certifications.

A strong knowledge of MIG (GMAW) process and equipment, including welding experience is required.

Physical Demands:
While performing the duties of the job, the intern is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. The intern is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The intern is frequently required to stoop, kneel, crouch or crawl and talk or hear. The intern will frequently walk. The intern must occasionally lift and/ or move up to 20 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The intern may be exposed to fumes or airborne particles, moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The intern is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Machining Co-op
Part Time
as school schedule permits
Summary of Duties: Cooperative education is a structured educational strategy integrating classroom studies with learning through productive work experiences in a field related to a student's academic or career goals. It provides progressive experiences in integrating theory and practice.

Essential Duties: Cooperative education is a partnership among students, educational institutions and employers, with specified responsibilities for each party. Cooperative education is usually associated with manufacturing positions, and requires more hands-on skills.

Education Level: Traditionally a high school senior, other years may be considered through an interview process

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Plant Manager (Davisville, WV)
Full Time
based on experience
mainly M-F, other hours as required by workload
Summary of Duties:
Directs and coordinates activities of the JWFI Davisville, WV production departments in processing materials and manufacturing products. The Davisville, WV location is an 80,000 ft² facility and an extension of JWF Industries’ 1,000,000 square feet of total metal manufacturing space across four locations in the Johnstown, PA area.

Essential Duties:
Reviews production orders or schedules to determine type, quantity, and specification of products and scheduled delivery dates in order to plan location operations.
Prepares operational schedules and coordinates manufacturing activities to ensure production and quality of products meets specifications.

Education Level: Bachelors degree or equivalent combination of education & experience

Experience:
Minimum five (5) years related manufacturing experience is required; metal manufacturing experience is strongly preferred.

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Quality Inspector (Davisville, WV)
Full Time
$17-24/hour, based on experience
as required
Summary of Duties:
Primary accountability is in support of projects to assure quality parts to the customer.
The successful candidate will perform first article, in-process, and final piece inspections in welding and machining areas, and accept or reject test objects based on a specific standard or specification; all work/tasks will be documented as required. Will also facilitate problem-solving and issue resolution through formal documentation. Previous experience managing projects, performing data analysis, and improving work processes is necessary.

Essential Duties:
Verifies dimensional size of materials such as plates, structural shapes, castings, weldments and assemblies. Conducts weld inspections in accordance with applicable AWS welding code. Reads and comprehends drawings, designs, and specifications for parts to be inspected. Determines equipment required for inspections. Analyzes and interprets indications of flaws, defects, and discontinuities.

Education Level: Minimum of an Associates' degree preferred (in a related field), or equivalent experience

Experience:
Previous inspection experience in a manufacturing environment is required; previous welding and/or machining experience highly preferred.
Work requires the ability to use manual tools (tape measures, micrometers, and calipers, etc).
Must have the ability to read and interpret blueprints. Strong GD&T training/experience preferred.
Experience with an ERP system also preferred.
Must be able to work in a high-paced environment and demonstrate strong organizational skills and attention to detail.

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Quality Inspector (Johnstown, PA)
Full Time
minimum $17/hour
typically M-F, 8:00am-5:00pm
Summary of Duties:
Verifies dimensional size of materials such as plates, structural shapes, castings, weldments and assemblies. Successful candidate will train on and learn our CMM, Faro Arm, and Laser Tracker equipment.

Essential Duties:
Primary accountability is in support of projects to assure quality parts to the customer.
Will facilitate problem-solving and issue resolution through formal documentation; experience managing projects, performing data analysis, improving work processes is necessary.

Education Level: Minimum of an Associates' degree preferred (in a related field)

Experience:
Previous experience in a manufacturing environment is required.
Must have the ability to read and interpret blueprints. Ability to use tape measures, micrometers, and calipers is required.
Strong GD&T training/experience preferred.
A familiarity with sophisticated inspection equipment (CMM and FARO) is highly desired.

Physical Demands:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Robotic Welding Programmer
Full Time
based on experience
follow scheduled Production hours
Summary of Duties:
JWF Industries, one of the largest metal fabricators in the Northeast, is seeking experienced Robotic Welding Programmers to join their Johnstown, PA team. This is a critical role responsible for programming robotic welding equipment and ensuring the on-site robots correctly and continuously fabricate metal components that meet manufacturing and customer specifications.

Essential Duties:
• Ensuring both weld quality and efficiency through planning and analysis of tasks
• Programming the robots in each of the robotic welding cells using the correct welding practices to meet customer requirements
• Designing, implementing, and maintaining robotic welding fixtures
• Monitoring the production efficiency of the robotic cells, seeking out programming improvement opportunities
• Guiding production employees in the proper methods of operation for each of the robotic cells

Education Level: Bachelor’s degree in engineering, robotics or a related field preferred

Experience:
• 2+ years of related experience and/or related training
• Work requires the ability to read, analyze, and interpret blueprints, weld symbols, technical procedures, and/or governmental regulations
• Must have the ability to write reports, document all related processes, and write procedure manuals

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. The employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 20 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee will be exposed to fumes or airborne particles, moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. There is a risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Shipping/Receiving Coordinator
Full Time
Based on experience
7am-4pm
Summary of Duties:
JWFI is a growing metal manufacturing company, expanding into defense & other markets with long-term work. We’re looking to interview an experienced Shipping/Receiving Coordinator to join the team at our Woodvale machining and welding facility. This position is responsible for coordinating and verifying all incoming and outgoing material into the Woodvale facility.

Duties include but are not limited to:
-Drive gas/diesel flat bed or box truck to transport and deliver products
-Determine space requirements and position of shipment and lay out position of shipment
-Assist employees with loading and unloading trucks as well as strapping and chaining regulations
-Determines routing and legal load limits of trucks, according to established schedules

Essential Duties:
-Verifies shipping notices, bills of lading, invoices, orders, and other records to determine shipping priorities, work assignments, and shipping methods required to meet shipping and receiving schedules
-Must drive and inspect trucks/forklifts and submit reports with truck/lift condition
-Work requires the ability to read & understand work orders and/or follow oral instructions to move materials or containers

Education Level: Minimum 2 years experience in inventory management preferred

Experience:
-Must maintain valid state Drivers License with clean driving record
-Must be able to quickly learn company and customer shipping/ receiving procedures
-Preferred candidate will have a minimum of 1 year of material handling experience in a manufacturing environment
-Must have basic skills in navigating and using a computer (Microsoft Word & Excel) to receive and invoice material and outside services.
-Must be willing to learn MRP system, process invoices, and enter receipts; computer training or previous on-the-job computer experience strongly preferred

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Technical Writer
Full Time
based on experience
M-F, 7a-4p, OT as needed
Summary of Duties:
After reading and interpreting documents (including but not limited to: engineering drawings, safety rules, operating and maintenance instructions, procedure manuals), the Technical Writer will present information through work instructions and/or other approved written documentation for the greatest reader comprehension.

Essential Duties:
• Gather information and take pictures to create and revise work instructions and/or other approved methods of documentation
• Maintain and redline drawings for all customers and link to Macola, as required
• Maintain system to manage correct revision level of drawings and work instructions
• Posts changes to computerized or manual control records, releases documents, and notifies affected departments
• Create and revise inspection forms and documentation, as required
• Report daily non-conformances and corrective actions
• Complete tasks associated with department operational plan

Education Level: HS diploma, additional formal schooling or training preferred

Experience:
Minimum of two (2) years of experience in a manufacturing environment.
Work requires strong computer application skills, and experience with Microsoft office suite, Microsoft Visio, and Acrobat Pro DC.
Work also requires above-average time management and organization skills for prioritizing tasks accurately based on a production schedule.

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. While in the production area(s), there is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Welders (Davisville, WV)
Full Time
up to $27/hour, based on experience
all shifts available
Summary of Duties: JWF Industries is seeking Welders to join their growing, highly skilled team in Davisville, WV. Davisville is an 80,000 ft² facility and an extension of JWF Industries’ 1,000,000 square feet of total metal manufacturing space across four locations in the Johnstown, PA area.

Essential Duties: These weld positions will lay out, fit, and weld components to manufacture weldments and sub-assemblies utilizing established welding processes. Will also select equipment and plan layout, assembly, and welding according to blueprints. Welders must be able to properly set up and adjust welding machine and various equipment as needed.

Education Level: Vocational school welding graduate or Associate’s degree in Welding highly preferred

Experience:
• Steel and/or aluminum qualified
• Ability to interpret complex blueprints & weld symbols, and fit/weld according to print (including the ability to build weldments from prints)


Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.




Welders (Edenton, NC)
Full Time
up to $27/hour, based on experience
5am-3:15, M-F
Summary of Duties:
PLEASE NOTE: TO BE CONSIDERED FOR EXPERIENCED WELDING POSITIONS, candidates must have current MIG and/or TIG welding experience in a manufacturing environment.

Fits and welds fabricated and metal components to manufacture weldments and sub-assemblies or related components using FCAW, GMAW or Aluminum processes. Work requires the ability to weld most sub-assemblies in production and fit and/or weld on most jigs for all production requirements.

Essential Duties:
These weld positions will lay out, fit, and weld steel and aluminum fabricated components to manufacture weldments and sub-assemblies utilizing established welding processes:
-Welds on medium and/or large fabrications in a jig fixture
-Welds on large fabrication projects in multiple positions that may include but is not limited to overhead, flat, and/or horizontal
-Selects equipment and plans layout, assembly, and welding according to blueprints
-Properly sets up and adjusts welding machine and various equipment as needed

Education Level: Vocational school welding graduate or Associate’s degree in Welding highly preferred

Experience:
Successful candidates will be certified, steel and/or aluminum qualified.
Must be able to interpret complex blueprints & weld symbols, and fit/weld according to print (including the ability to build weldments from prints).

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Welders (Johnstown, PA)
Full Time
up to $27/hour based on experience
varies
Summary of Duties:
PLEASE NOTE: TO BE CONSIDERED FOR EXPERIENCED WELDING POSITIONS, candidates must have current MIG and/or TIG welding experience in a manufacturing environment.

Fits and welds fabricated and metal components to manufacture weldments and sub-assemblies or related components using FCAW, GMAW or Aluminum processes. Work requires the ability to weld most sub-assemblies in production and fit and/or weld on most jigs for all production requirements.

Essential Duties:
These weld positions will lay out, fit, and weld steel and aluminum fabricated components to manufacture weldments and sub-assemblies utilizing established welding processes:
-Welds on medium and/or large fabrications in a jig fixture
-Welds on large fabrication projects in multiple positions that may include but is not limited to overhead, flat, and/or horizontal
-Selects equipment and plans layout, assembly, and welding according to blueprints
-Properly sets up and adjusts welding machine and various equipment as needed

Education Level: Vocational school welding graduate or Associate’s degree in Welding highly preferred

Experience:
-Successful candidates will be certified, steel and/or aluminum qualified.
-Must be able to interpret complex blueprints & weld symbols, and fit/weld according to print (including the ability to build weldments from prints).

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.




Welding Inspector (Johnstown, PA)
Full Time
$17-28, based on experience
varies
Summary of Duties:
Conducts weld inspections in accordance with applicable AWS welding code.
Reads and comprehends drawings, designs, and specifications for parts to be inspected.
Determines equipment required for inspections.
Analyzes and interprets indications of flaws, defects, and discontinuities.

Essential Duties:
Organize and maintain customer specific weld testing data.
Perform first, in-process, and final piece inspections in weld area, as needed.
Accept or Reject test objects based on a specific standard or specification.
Record inspection results manually later to be entered into a report.
Participate in review and disposition for all weld-related non-conformances and corrective actions.
Support the area supervisor in leading the welders by training, coaching and advising.
Serve as a resource for all location welding needs.
Assist and support Production, Quality or Engineering when not participating in primary welding responsibilities.

Education Level: AWS CWI (Certified Welding Inspector) required

Experience:
Minimum of two (2) years of weld inspection experience
Experience using a variety of welding equipment and procedures (TIG, GMAW, etc.)
Experience in using manual tools (squares, calipers etc.)
Must have the ability to read and interpret blueprints, technical documents and drawings; must have the ability to dimensionally inspect parts with standard measuring equipment.
Experience with an ERP system, preferred.
Able to work in a high-paced environment.
Strong organizational skills and attention to detail.
Knowledge of NDT inspection using MT or PT a plus.

Physical Demands:
While performing the duties of the job, the employee is required to have the ability to concentrate and perform responsibilities by maintaining a constant state of focus and mental alertness. While performing the duties of the job, the employee is regularly required to stand, use hands (including gripping & grasping) and reach with arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee will frequently walk. The employee must occasionally lift and/ or move up to 50 lbs. Specific vision requirements such as color vision, peripheral vision, depth perception and the ability to adjust focus.

The employee is regularly exposed to fumes or airborne particles. There is frequent exposure to moving mechanical parts with occasional exposure to wet and/ or humid conditions and extreme cold or heat. The employee is at risk of electrical shock and vibration. The noise level in the work environment is usually loud.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.